Description
Description
The POLYKEN® 1600-HT system is designed for the corrosion protection of new and existing pipelines with a maximum operating temperature of 250°F(121°C). The primer l ayer is a solvent-based, thermally-activated material formulated for elevated temperature stability. The coating layer consists of a cross-linked polyethylene backing and a cross-linked elastomeric adhesive capable of maintaining long-term protection at elevated temperature.
The POLYKEN® 1600-HT has a release liner to enable proper unwinding of the roll.
Features:
- Excellent adhesion to pipe and self
- Can be applied over a wide temperature range
- Good conformability and consistent uniform thickness
- Easily applied with no special equipment
- Compatible with common pipe coatings
- Excellent resistance to cathodic disbonding
POLYKEN 1600-30 Properties
- Tensile strength: 40 lbs/in(70 N/10 mm)
- Elongation 500%
- Peel Adhesion to Primed Pipe 40 N/cm to backing 20N /cm
- Dielectric Strength 40 KV, Cathodic Disbandment 9.5 mm radius
- Impact resistance 3.2J ,Volume Resistivity 1.2 x 1015 ohm.cm
- Water Vapor Transmission Rate 0.06g/M2/24h
- Water Absorption Rate < 0.08%
- Serve temperature -40 to +120 ℃
